Got a call from a customer in Jackson crane not hoisting up
When into teach and shunt and it still would not Hoist up kept kicking out the drive
Had to reset the CCS with Shunt Pass
Then had to go in and reset Load PIN
To do this
Go to Main Load Pin Hit enter twice on ok to get a check mark
Do the same with redundant
Then turn off Breaker Q133 for CCS
Turn back on and then go back to load pin and number will show up below hit enter twice and do the same on redundant load pin
Turn off Breaker Q133 for CCS
Turn back on and double check both load pins read zero and proceed with teach in progress
BAM MOTHER FUCKERS!
