Fuse in back of charger had blown. 4 amp fuse, and there is a spot to place a spare. T9 torx to remove screws
Trouble shooting of HUP Radio Remote
HUP Radio Remote How to check working order of remote
Checking working order of HUP Joysticks
This explanation is not correct. In order to test the switches and joysticks of the remote, you must do the following in order.
- Turn key off
- Depress Emergency Stop Switch
- Press and hold ESC button next to jog dial
- Turn key back on
- Continue holding ESC button until the proper diagnostic screen is displayed
- Twist Emergency Stop Switch until it pops back up
- Now you should have proper display of the working order of the switched and joystick
HUP Radio Remote Description of Buttons
HDT 80 Slew Drive password
1571
Password to Top Slew Data Sheets
webdata
Password to Manuals
webd
Multuhog Check Fault Codes
With key on, engine off. Press and hold bottom 2 buttons on left of display. It will prompt you to enter a code. 2300. It will then display codes.