Change the parameter in the slew drive to warning instead of fault.
- Make sure the crane is powered off
- Connect remote to Ethernet cable and the other end to the top of the ACS 380 drive
- Start crane
- Select MENU
- Select PARAMETERS
- Go to menu 96 and select menu 96.02 (Pass Code)
- Enter code <8528>
- ESC back to menu 90.45 (Motor Feedback)
- Change 90.45 to WARNING (1)
- ESC back to menu list
- Verify Menu 96.10=4 (work)
- Go to Menu 96.11 and select Option 18 (be sure it is 18!!!!)
- Allow change to save to drive
- Go back to 96.11 and select Option 1