Had a customer that was loosing remote function while on the job and had full battery and full signal. It would lose signal and go to the Potain Screen
We tried lots of different things and eventually ended up changing the channel on the remote. If you change the channel on the remote you must also change the dip switches on the high powered antenna. See post about that.
Please note that it is possible to just switch groups and still be on the same channel which does nothing. Changing the group does not necessarily mean that you change the channel. For example channel 3 is both apart of group 1 and group 3.
To change the channel on the remote
Remote off
Estop down
Hold 2 part 4 part button next to screen Turn on remote
