Crane is shutting down during operation, however no fault is displayed and the operation symbol on the LMI bottom right goes from a red circle to flashing green almost immediately. After searching for the fault history (no active faults), found a list of Can Bus faults.
2032.33057 CAN bus CMD: CAN error bus off
2032.33058 CAN bus CMD: CAN alarm bus error
2032.33040 CAN bus CMD: CAN saturation
2032.33058 CAN bus CMD: CAN alarm bus error
2032.33057 CAN bus CMD: CAN error bus off
2032.33040 CAN bus CMD: CAN saturation
Located on the Can Bus CMD (Command) ‘channel’ is the crane’s modem. Disconnect the top 3 and the bottom large connector. Crane will restart and work
